- Put Icon in Tool Tray - When this option is on, PingPlotter will move to the tool tray when minimized.
- Show Round Trip Time - Don't show/show the Round Trip time below the trace data graph.
- Ignore First Hop(s) - The default is "trace all hops". From this menu option you can skip hops 1, 2, 3, 4 and 5. Say you're hooked up to a DSL modem and don't want the modem to show in your traces. You'd set this option to Start at Hop 2.
If you wish, you can also choose to only trace the final hop.
- Show Timeline Graphs - Don't show/show the Timeline Graphs (the bottom history graphs).
- Customize View... - this will allow you to enable / disable columns from the upper trace graph.
- Graph Current Sample - Turns on / off the "X" on the trace graph for the current sample. By "Current", this means the most recent sample in the selected set.
- Graph Min/Max range - Turns on / off the Min/Max range lines in the upper graph.. This can be handy to turn off for long-term monitoring sessions where the maximum range might push the graph scale too high.
